STS100AB二等标准铂电阻说明书

深圳市银飞电子科技有限公司

·www.1001718.com·一百分的仪器仪表

User manual

JOFRA STS-100 A/B

Probes 250/350/500/901

Copyright 2005 AMETEK DENMARK A/S

Table of contents:

1.0 General information ......................4

2.0 Introduction....................................5Page

3.0 Functionality ..................................6

3.1

3.2

3.3

4.1Functional description ................. 6Connections ................................ 6Serial number.............................. 8Operation area ............................ 94.0 Operation .......................................9

5.0 Maintenance.................................10

6.0 Technical specifications.............11

1050490413-04-20053

1.0 General information

This manual is only effective for the following

products:

JOFRA STS-100 A/B - 250 mm

JOFRA STS-100 A/B - 350 mm

JOFRA STS-100 A/B - 500 mm

JOFRA STS-100 A/B - 901 (90°)

The products are manufactured by:

AMETEK DENMARK A/S

GYDEVANG 32-34

DK-3450 ALLERØD

DENMARK

TEL: +45 48 16 80 00

FAX: +45 48 16 80 80

413-04-2005105049 04

深圳市银飞电子科技有限公司

·www.1001718.com·一百分的仪器仪表 2.0 Introduction

The JOFRA STS-100 A/B probes are designed forfast and traceable calibration and temperaturemeasuring with AMETEK DTI- and ATC-systems,and are ready for use.

Please read this manual carefully before use, toobtain maximum value of your calibration system.

Warning

•Read this manual before use.Do not use in hazardous area.Handle carefully.Never exceed temperature range

1050490413-04-20055

深圳市银飞电子科技有限公司·www.1001718.com·一百分的仪器仪表 3.0 Functionality

3.1Functional description

The sensor can be used for measuring temperaturein the range-150°C to 650°C (-238°F to 1202°F).Sensors may be supplied with certificates for alimited temperature range.

The resistance of the JOFRA STS-100 A/B sensor isconverted to temperature according to IEC-751 (ITS-

90) (calculated coefficients specific for the sensorare stated on the certificate).

3.2Connections

The sensor is delivered with a connecting cable andwith the following options:

613-04-2005105049 04

Model with banana plugs:

2 meter cable

G

B

B

R

R

Use the ground terminal in order to reduce noise.Model with lemo connection:

2 meter or 0.5 meter cable

1050490413-04-20057

3.3Serial number

The serial number is placed on the sensor as shownon the figure below:

Serial number

813-04-2005105049 04

4.0 Operation

4.1Operation area

All the sensors are intended for use in areas whichmeet the following:

Ambient temperature

range:-20°C to 70°C (-4°F to 158°F)Humidity:0% to 90%

Protection class : IP 50

Warning

Do not use in hazardous areas.

1050490413-04-20059

5.0 Maintenance

The sensor does not require specific maintenancebefore or after use. The user may carry out thefollowing procedure himself:

•Cleaning sensor : Use alcohol or water and

a soft cloth.

Caution…

•The sensor must always be protected

against any mechanical damage.

•The sensor must never be exposed

to mechanical shock effects.

•Avoid thermal shock

•Any bending of the sensor may

cause permanent damage

1013-04-2005105049 04

深圳市银飞电子科技有限公司·www.1001718.com·一百分的仪器仪表 6.0 Technical specifications

Sensor type

Sensor length::Platinum sensor Pt100.α = 0.00385250 mm

350 mm

500 mm

165 mm (90° Angle)

Temperature range : -150°C to 650°C (-238°F

to 1202°F)

Accuracy

Repeatability

Hysteresis

Stability

2)Self heating effect1)::::

:

:0.002°C0.01°C @ 0°Ctyp. 0.014°C @ 0°C0.06°C/mWA:B:A:

B:OD4 mmOD1/4”100 mm110 mmDiameterImmersion depth

Media compatibility : INCONEL 600

1)When used in the range –80°C to 650°C (-122°F to 1202°F)

2)Stability when exposed to 650°C (1205°F) for 100 hours. Stability will depend on actual use of the sensor.

1050490413-04-200511

深圳市银飞电子科技有限公司·www.1001718.com·一百分的仪器仪表 Response time:A:τ(50%) = 8 sec.

τ(90%) = 26 sec.

B:τ(50%) = 18 sec.

τ(90%) = 44 sec.

Recommendedmeas. current

Connections::1 mALemo plugs are standardAll sensors are supplied with an accredited

certificate according to the ITS 90 temperature

scale. The sensors are as standard calibrated in therange –45°C to 650°C (-49°F to 1202°F).

Calibration is carried out at:

12-45°C/-49°F-20°C/-4°F0°C/32°F50°C/122°F100°C/212°F200°C/392°F320°C/608°F450°C/842°F650°C/1202°F13-04-2005105049 04

深圳市银飞电子科技有限公司

·www.1001718.com·一百分的仪器仪表

User manual

JOFRA STS-100 A/B

Probes 250/350/500/901

Copyright 2005 AMETEK DENMARK A/S

Table of contents:

1.0 General information ......................4

2.0 Introduction....................................5Page

3.0 Functionality ..................................6

3.1

3.2

3.3

4.1Functional description ................. 6Connections ................................ 6Serial number.............................. 8Operation area ............................ 94.0 Operation .......................................9

5.0 Maintenance.................................10

6.0 Technical specifications.............11

1050490413-04-20053

1.0 General information

This manual is only effective for the following

products:

JOFRA STS-100 A/B - 250 mm

JOFRA STS-100 A/B - 350 mm

JOFRA STS-100 A/B - 500 mm

JOFRA STS-100 A/B - 901 (90°)

The products are manufactured by:

AMETEK DENMARK A/S

GYDEVANG 32-34

DK-3450 ALLERØD

DENMARK

TEL: +45 48 16 80 00

FAX: +45 48 16 80 80

413-04-2005105049 04

深圳市银飞电子科技有限公司

·www.1001718.com·一百分的仪器仪表 2.0 Introduction

The JOFRA STS-100 A/B probes are designed forfast and traceable calibration and temperaturemeasuring with AMETEK DTI- and ATC-systems,and are ready for use.

Please read this manual carefully before use, toobtain maximum value of your calibration system.

Warning

•Read this manual before use.Do not use in hazardous area.Handle carefully.Never exceed temperature range

1050490413-04-20055

深圳市银飞电子科技有限公司·www.1001718.com·一百分的仪器仪表 3.0 Functionality

3.1Functional description

The sensor can be used for measuring temperaturein the range-150°C to 650°C (-238°F to 1202°F).Sensors may be supplied with certificates for alimited temperature range.

The resistance of the JOFRA STS-100 A/B sensor isconverted to temperature according to IEC-751 (ITS-

90) (calculated coefficients specific for the sensorare stated on the certificate).

3.2Connections

The sensor is delivered with a connecting cable andwith the following options:

613-04-2005105049 04

Model with banana plugs:

2 meter cable

G

B

B

R

R

Use the ground terminal in order to reduce noise.Model with lemo connection:

2 meter or 0.5 meter cable

1050490413-04-20057

3.3Serial number

The serial number is placed on the sensor as shownon the figure below:

Serial number

813-04-2005105049 04

4.0 Operation

4.1Operation area

All the sensors are intended for use in areas whichmeet the following:

Ambient temperature

range:-20°C to 70°C (-4°F to 158°F)Humidity:0% to 90%

Protection class : IP 50

Warning

Do not use in hazardous areas.

1050490413-04-20059

5.0 Maintenance

The sensor does not require specific maintenancebefore or after use. The user may carry out thefollowing procedure himself:

•Cleaning sensor : Use alcohol or water and

a soft cloth.

Caution…

•The sensor must always be protected

against any mechanical damage.

•The sensor must never be exposed

to mechanical shock effects.

•Avoid thermal shock

•Any bending of the sensor may

cause permanent damage

1013-04-2005105049 04

深圳市银飞电子科技有限公司·www.1001718.com·一百分的仪器仪表 6.0 Technical specifications

Sensor type

Sensor length::Platinum sensor Pt100.α = 0.00385250 mm

350 mm

500 mm

165 mm (90° Angle)

Temperature range : -150°C to 650°C (-238°F

to 1202°F)

Accuracy

Repeatability

Hysteresis

Stability

2)Self heating effect1)::::

:

:0.002°C0.01°C @ 0°Ctyp. 0.014°C @ 0°C0.06°C/mWA:B:A:

B:OD4 mmOD1/4”100 mm110 mmDiameterImmersion depth

Media compatibility : INCONEL 600

1)When used in the range –80°C to 650°C (-122°F to 1202°F)

2)Stability when exposed to 650°C (1205°F) for 100 hours. Stability will depend on actual use of the sensor.

1050490413-04-200511

深圳市银飞电子科技有限公司·www.1001718.com·一百分的仪器仪表 Response time:A:τ(50%) = 8 sec.

τ(90%) = 26 sec.

B:τ(50%) = 18 sec.

τ(90%) = 44 sec.

Recommendedmeas. current

Connections::1 mALemo plugs are standardAll sensors are supplied with an accredited

certificate according to the ITS 90 temperature

scale. The sensors are as standard calibrated in therange –45°C to 650°C (-49°F to 1202°F).

Calibration is carried out at:

12-45°C/-49°F-20°C/-4°F0°C/32°F50°C/122°F100°C/212°F200°C/392°F320°C/608°F450°C/842°F650°C/1202°F13-04-2005105049 04


相关内容

  • 初中物理八年级下册教材内容
  • 初中物理八年级下册教材内容共包括四章,他们分别是:欧姆定律.电功率.电与磁.信息的传递,他们都是功勋卓著的电与磁内容. 第六章 欧姆定律 课程标准的要求: 1. 初步了解半导体的一些特点, 了解半导体材料的发展对社会的影响. 2. 初步了解超导体的一些特点, 了解超导体对人类生活和社会发展可能带来的 ...

  • 初三物理电学模拟试题及答案
  • 初三物理电学模拟试题(一) 学生: 一.单项选择题:下列各题的四个选项中,只有一个符合题意,请将正确选项的代号填在题后括号里.(每题2分,共20分.错选.多选.不选,该题不得分.) 1.用下列哪个器材可以直接辨别家庭电路中的火线和零线 ( ) A.电流表 B.电压表 C.电能表 D.测电笔 答案:D ...

  • 沪科版普通高中物理课程标准实验教科书
  • 沪科版普通高中物理课程标准实验教科书 <物理3-2>的编写思路和特点 王继珩( 合肥市教学研究室 230061 ) 本册教材是按照课程标准选修系列3的第2个模块要求编写的,由上海科技教育出版社出版,束炳如与何润伟先生主编,是供选修理工科的学生使用的.旨在通过电磁感应.交变电流以及传感器等 ...

  • 误差理论费业泰课后答案
  • <误差理论与数据处理> 第一章 绪论 1-1.研究误差的意义是什么?简述误差理论的主要内容. 答: 研究误差的意义为: (1)正确认识误差的性质,分析误差产生的原因,以消除或减小误差: (2)正确处理测量和实验数据,合理计算所得结果,以便在一定条件下得到更接近于真值的数据: (3)正确组 ...

  • 人教版初中物理教材(1)1
  • 中学物理教学资料 二.进一步完善图片设计在"新课题引入"中的功能! 在物理课教学中应突出物理知识的趣味性,旨在创造意境,更好地激发学生的学习兴趣,使他们轻松愉快地自觉学习.所以新教材中采用大量漫画式的插图来启发学生轻松愉快地学习.图片是教材的有机组成部分.作为一种教学媒体,它具有 ...

  • 二等铂电阻温度计的测量不确定度
  • QTD-M020-2007 二等铂电阻温度计标准装置的测量不确定度评定 1.概述: 1.1测量依据:JJG229-1998<工业铂铜热电阻检定规程> 1.2测量标准:QJ18α型0.02级,测量电桥和二等标准铂电阻温度计. 1.3被测对象:工业B级铂电阻温度计,分度号:P1100 2.不 ...

  • 东北大学最终表
  • 东北大学 导师介绍 资源与土木工程学院 唐春安,1958年3月生,博士生导师,教育部"长江学者奖励计划特聘教授".中国科学院力学所非线性力学国家 重点实验室特邀研究员.中国岩石力学与工程学会副理事长.国际岩石力学学会中国小组成员.获得国家教委"跨世纪优秀人才培养计划 & ...

  • 2014年北京中考说明
  • 2014年北京市高级中等学校招生统一考试 考试说明 物理 一.考试范围 物理学科考试以教育部制订的<义务教育物理课程标准(2011年版)>规定的内容标准为考试范围,适当兼顾北京市现行不同版本教材的内容和教学实际情况. 二.考试内容和要求 (一)考试目标 物理学科考试既重视考查初中物理基础 ...

  • 化工仪表及其自动化3
  • 本文由liqimen贡献 ppt文档可能在WAP端浏览体验不佳.建议您优先选择TXT,或下载源文件到本机查看. 化工仪表及其自动化 第一篇 --第二章 检测仪表 内容提要 压力检测及仪表 压力单位及测压仪表 压力计的选用 流量检测及仪表 概述 差压式流量计 转子流量计 椭圆齿轮流量计 涡轮流量计 电 ...